HCHandCalc

Gable Frame — Pinned Bases, Horizontal Load at Eave

Frames · Symmetric Gable Frame · Pinned Bases · Horizontal (Wind) Point Load at Eave (B) · Force method closed-form
Worked example

This page shows the complete calculation with example values: the inputs, the results and every step in between.

The interactive calculator is part of HandCalc Pro. With Pro you can enter your own values, switch between SI and Imperial units and download the technical report as PDF or Word.

1

Geometry, load and stiffness

Span, eave/crown height, horizontal load at B, and section moments of inertia
m
m
m
kN
Define separate moment of inertia / modulus of elasticity for column and rafter
Model: Bases A and D are pinned; joints B, E, C are rigid. P is applied horizontally exactly at B (the eave facing the wind). Unlike Type-2 (a flat portal frame), the SLOPED roof means the horizontal load is NOT split equally between the two supports — the B side (loaded side) and the C side carry different H values. The system is indeterminate to the first degree; solved with the unit-load method.
2

Reactions and horizontal thrust

HA, HD, Rv
δD0 · δD1unit-load flexibility coefficients (absolute value)
δD0=Ph³/(3EcIc)+Phℓ(2h+r)/(4EbIbcosθ)  ·  δD1=2h³/(3EcIc)+ℓ[(h+r)³−h³]/(3rEbIbcosθ)
0 0
HDat support D (redundant) = δD0/δD1 = 12.21kN
HAat support A = P − HD = 17.79kN
Rvat each base, vertical (force couple) = Phℓ = 10kN
In Type-2 (flat roof), the axial stiffness of the columns and beam made H equal to P/2 at both supports. On a sloped roof the rafters' axial stiffness no longer equalizes the horizontal displacements so simply (rafter elongation has both a horizontal and a vertical component) — hence HA≠HD. Uplift (tension) on the A side, compression on the D side.
3

Bending moments

Eave corner moments (B, C) and crown moment (E)
Mk,B= HA·h = 71.15kN·m
Mk,C= HD·h = 48.85kN·m
Mmcrown (E) = HD(h+r) − Ph/2 = 13.28kN·m
Mk,B and Mk,C are GENERALLY DIFFERENT (unlike Type-2's equal values on a flat roof) — the loaded-side corner moment depends on the column shear (HA). Column moment is zero at the base and increases linearly to the corner (pinned base, no base moment).
Bending Moment Diagram (M) — on the frame
−71.15+48.85+13.28 kN·m
4

Shear and axial force

V, N in the columns and rafters
Column AB (B side)
V=17.79 kN N=10 kN
Column CD (C side)
V=12.21 kN N=10 kN
Rafter B-E · Rafter E-C(compression, both of constant magnitude)
NBE=8.42 kN NEC=14.75 kN
VBE=13.35 kN VEC=5.62 kN
V and N are CONSTANT along each rafter (no distributed load, only point effects at the ends) — they jump between the two rafters at the crown.
Shear Force Diagram (V) — on the frame
V=17.79 kNV=12.21 kN13.35 kN5.62 kN
Axial Force Diagram (N) — on the frame
N=+10 kN (tension)N=−10 kN (compression)−8.42 kN−14.75 kN