HCHandCalc

Cantilever Beam — Concentrated Load at Free End

Cantilever Beam · Concentrated Load at Free End · AWC Design Aid No. 6
Worked example

This page shows the complete calculation with example values: the inputs, the results and every step in between.

The interactive calculator is part of HandCalc Pro. With Pro you can enter your own values, switch between SI and Imperial units and download the technical report as PDF or Word.

1

Geometry and load

Define the span and the concentrated load at the free end (fixed on the left, free on the right)
m
kN
2

Show calculation details

R, Mmax
R = Vmaxat the fixed end = P = 20.00kN
Mmaxat the fixed end (negative: tension on top fibre) = Pℓ = 20 × 4 = 80.00kN·m
3

Deflection calculation

Define E and I for δmax
MPa
cm⁴
δmaxat the free end = Pℓ³3 EI = 20 × 4³3 × 200000 × 8000 = 26.67mm
Deflected Shape Diagram
δₘₐₓ = 26.67 mm8.33 mm
4

Bending-stress check

Compare σmax against the allowable stress
cm³
MPa
σmax = MmaxS = 80 × 10³500 = 160.00MPa
0.97 σ / Fb
Marginal
5

Point analysis

Vx, Mx, δx values at a given point x
m
0 (fixed) 2 m 4 m
Vx = P = 20.00kN
Mxnegative (tension on top fibre) = −P(ℓ − x) = −20 × (4 − 2) = −20 × 2 = -40.00kN·m
δx = Px²6 EI·(3ℓ − x) = 8.33mm