HCHandCalc

Cantilever Beam — Uniformly Distributed Load

Cantilever Beam · Uniformly Distributed Load · AWC Design Aid No. 6
Worked example

This page shows the complete calculation with example values: the inputs, the results and every step in between.

The interactive calculator is part of HandCalc Pro. With Pro you can enter your own values, switch between SI and Imperial units and download the technical report as PDF or Word.

1

Geometry and load

Define the span and the UDL (fixed at the left, free at the right)
m
kN/m
2

Show calculation details

R, Mmax
R = Vmaxat the fixed end = qℓ = 20 × 6 = 120.00kN
Mmaxat the fixed end (negative: tension on top fibre) = qℓ²2 = 20 × 6²2 = 360.00kN·m
3

Deflection calculation

Define E and I for δmax
MPa
cm⁴
δmaxat the free end = qℓ⁴8 EI = 20 × 6⁴8 × 200000 × 8000 = 202.50mm
Deflected Shape Diagram
δₘₐₓ = 202.5 mm35.83 mm
4

Bending-stress check

Compare σmax with the allowable bending stress
cm³
MPa
σmax = MmaxS = 360 × 10³500 = 720.00MPa
4.36 σ / Fb
Inadequate
5

Point analysis

Vx, Mx, δx values at a given point x
m
0 (fixed end) 3 m 6 m
Vx = q(ℓ − x) = 20 × (6 − 2) = 20 × 4 = 80.00kN
Mxnegative (tension on top fibre) = −q(ℓ − x)²2 = −20 × (6 − 2)²2 = -160.00kN·m
δx = q24 EI·(6ℓ²x² − 4ℓx³ + x⁴) = 35.83mm