HCHandCalc

Three-Hinged Circular Arch — Concentrated Load

Arches · Three-Hinged Circular Arch · Pinned Bases + Crown Hinge · Statically Determinate · Vertical Point Load at Any x
Worked example

This page shows the complete calculation with example values: the inputs, the results and every step in between.

The interactive calculator is part of HandCalc Pro. With Pro you can enter your own values, switch between SI and Imperial units and download the technical report as PDF or Word.

1

Geometry and load

Span, rise (→ radius R, half-angle θ), and a vertical point load at distance a from A
m
m
kN
m
0 10 m 20 m
Rradius of the circular axis = ℓ²8f + f2 = 14.5m θhalf-angle, sinθ = ℓ/2R = 43.6°
Model: A and C are pinned; a third hinge at the crown (B) makes the system statically determinate. Circular axis: y(x) = √(R² − (x − ℓ/2)²) − (R − f). Sign convention: M positive when the intrados (inside face) is in tension; N positive in compression.
2

Reactions and horizontal thrust

Vertical reactions as for a simple beam; H from the crown condition
RAvertical, at the near support = P·bℓ = 100×15/20 = 75kN
RCvertical, at the far support (b = ℓ − a) = P·aℓ = 100×5/20 = 25kN
Hhorizontal thrust, inward at both supports — c = min(a, b) = P·c2f = 100×5/(2×4) = 62.5kN
H = M0(ℓ/2)/f — the simple-beam moment at the crown divided by the rise, from ΣMB=0. Reactions and thrust depend only on ℓ, f, P and a — identical to the parabolic arch; the axis shape only changes M, V, N along the arch.
3

Bending moment (M)

M(x) = M0(x) − H·y(x) with the circular y(x) — extremes located numerically along the axis
M(x)M0 = simple-beam moment; y(x) = √(R² − (x − ℓ/2)²) − (R − f)
= RA·x − H·y(x)0 ≤ x ≤ a = RC·(ℓ − x) − H·y(x)a ≤ x ≤ ℓ
Mmax+at x = 5 m (under the load) = max M(x) = 180.58kN·m
Mmax−at x = 15.38 m (unloaded half) = min M(x) = -69.81kN·m
M = 0 at A, B and C. Unlike the parabolic arch, the circular axis is not the funicular of any uniform load, so the extremes have no simple closed form: M(x) is evaluated along the axis (1000 stations) and the extremes are read off. The positive peak usually sits under the load; the negative one on the unloaded half, but not at its quarter point.
Bending Moment Diagram (M) — drawn on the tension side
PM⁺ = 180.58 kN·mM⁻ = -69.81 kN·mM = 0x=8: M=58.66 kN·mblue: positive (intrados in tension) · red: negative (extrados in tension)
4

Shear (V) and axial force (N)

Resolved along the arch tangent — both jump at the load
V(x), N(x)V0 = simple-beam shear (RA left of the load, RA − P right of it); tanφ = −(x − ℓ/2)/√(R² − (x − ℓ/2)²)
V = V0·cosφ − H·sinφshear, normal to the axis N = H·cosφ + V0·sinφaxial, compression positive
NAat support A, φA = θ = H·cosφA + RA·sinφA = 96.98kN
NCat support C = H·cosφA + RC·sinφA = 62.5kN
Ncrownx = ℓ/2, φ = 0 = H = 62.5kN
ΔVjump in shear at the load, x = a = P·cosφ(a) = 93.87kN
Vcrownx = ℓ/2 — equals V0 there, since φ = 0 = -25kN
N stays compressive along the whole arch; its largest value is at the support on the loaded side (φA = θ). The axial jump at the load is P·sinφ(a).
Shear Force Diagram (V) — along the arch axis
PV⁻ = 48.85 kNV⁺ = -45.02 kN11.21 kN25 kNx=8: V=-33.38 kNV jumps by P·cosφ at the load
Axial Force Diagram (N) — along the arch axis
PN = 96.98 kNN = 62.5 kNN = 62.5 kN (crown)x=8: N=58.45 kNred: compression throughout
5

At a given section

Read the values at any x — marked in amber on the diagrams
m
0 10 m 20 m
y(x)arch height at this section = 3.86m φ(x) = 7.9°
M(x)= M0(x) − H·y(x) = 58.66kN·m
V(x)= V₀·cosφ − H·sinφ = -33.38kN
N(x)= H·cosφ + V₀·sinφ — compression = 58.45kN